Expert Answers about RV Slide Out Parts

• Replacement bulb seal for slide out on 2016 Thor Hurricane 35C RV
• I was able to get that part added for you. The correct slide wiper for your 2016 Thor Hurricane 35C is Lippert Flat Wiper Bulb Seal for RV Slide-Outs - 1-1/4" # LC25ED. This is sold per inch, so you would just enter in the required number of inches in the quantity box when checking out.
  view full answer...


• Recommended Black Solera Slide Out Awnings For An 86 And 117 Flange To Flange Measurement
• For a 117" measurement you would need the Solera RV Slide-Out Awning # LCV000182037 to get the black fabric. For the 86" measurement you would need part # Solera RV Slide-Out Awning # LCV000168106. I recommend picking up some butyl tape # AL28FJ to prevent water from leaking into the walls of your trailer through the mounting screws.
  view full answer...


• Are There Height Adjustment Kits Available For Kwikee SuperSlide RV Slide Out Storage Trays
• The Kwikee SuperSlide systems, like part # LC370774, do not have a lift kit available so you would need to build one yourself out of wood in order to clear the 3" lip for your compartment door. You might be able to use the Height Adjustment Kit for MORryde RV Cargo Sliding Trays # MR34VR, but would most likely need to drill holes into the tray track in order to mount it on the kit since it was intended for use with MORryde trays.
  view full answer...


• Replacement Slide-Out Awning for Travel Trailer
• We offer RV slide-out awnings in many sizes and a choice of colors that you can see by clicking on the page I linked for you. All of our slide-out awnings are 50-inches wide and vary in length from 5-1/2 to 16-feet. Just click on your preferred color and size. For example, for a white 7-foot awning and hardware kit use Lippert part # LCV000163285, their Solera 7' Slider awning. This permanently attaches to your slide room and automatically retracts/extends with the slide-out as it moves....
  view full answer...


• Slide Slickers to Protect RV Carpet
• The only slide slickers we carry are the Lippert Carpet Protectors for RVs with Slide Outs # LC134993 which measure 40" long x 5" wide. This will be a standard size and should be able to fit a wide variety of slide out sizes.
  view full answer...


• Replacement Rubber Wiper Seal for RV Slide Out
• We do have the Rubber Bulb Seal with C-Channel for RV Slide Out - 15' Long x 7/8" Tall, # SR74FR. Please take a look at the links I attached and let me know if any of these will meet your needs.
  view full answer...


• Availability of Slide-Out Roller Bearings on a 2004 R-Vision Class B RV
• The Lippert Components Roller Bearing, # LC118353, is designed to fit Lippert above floor slide-outs. The length of the bolt is 1-3/8 inches long and measures 3/8 inch bolt size with 24 thread pitch. The bearing measures 3/4 of an inch in diameter and 1/2 of an inch wide. Unfortunately, I do not have any info on what brand slide-out you have in your 2004 R-Vision Class B RV. If your current slide-out bearing matches these measurements, then the Lippert bearing will wok well for your...
  view full answer...


• MORryde Cargo Sliding Tray 45" x 90" Availability
• We do not personally design and build the MORryde Rv Cargo Sliding Trays but we do carry two sizes close to your needed 45" x 90" dimensions. The MORryde Sliding Tray for RV Cargo Compartment - 90" x 42" # MR35FR and the MORryde Sliding Tray for RV Cargo Compartment - 90" x 48" # MR32FR.
  view full answer...


• Recommendations RV Slide-Out Awning & Shades
• Hello, thank you for your question. Window shades are sold separately from slide out awnings. To determine the proper size slide out awning for your motorhome you will need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go any less. Please look at the the Solera RV Slide-Out Awning in Black,...
  view full answer...


• Correct Solera RV Slide-Out Awning Measurements
• Hello, sorry for any confusion. For determining the proper size Solera Slider your project requires you need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). Yes you can have greater than 2-1/2" overhang if you want, such as the 3" stated, it is just suggested that you do not go any less in width. For the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - White, # LCV000163285,...
  view full answer...


• Slide-Out Tray For a Generator with 24" x 34" Base Dimensions
• For a slide-out tray that will fit your generator that has base dimensions of 24" x 34" you can use the MORryde RV Cargo Sliding Tray # MR37FR which has measurements of 36" x 26" and can hold up to 800 lbs.
  view full answer...


• Risers For MORryde RV Cargo Sliding Tray
• You will need risers but we have them. The MORryde RV Cargo Sliding Tray, # MR47FR will have 1.57" of clearance from the bottom of the tray to the bottom of the slides. But we have the Height Adjustment Kit, # MR34VR for trays being installed in compartments with a lip taller than 1-5/8". Use this to raise your tray to sit at either 2-1/2", 2-3/4", or 3-1/8" higher. Please note the linked product review video below.
  view full answer...


• Protective Screen Door Grille for Use with RV Screen Door Slide CAM45581
• We do offer an Adjustable Screen Door Grille, part # CAM43980 from Camco, that adjusts from 20- to 29-inches to fit a range of RV doors. This grille provides protection to your door screen from accidental pushes from young hands. Hardware is included. The photo I prepared for you shows how the corners adjust to provide the 9-inch size range.
  view full answer...


• Motor Home Screen Door Slide and Mount Piece Options
• Yes, there can be issues with UV damage and RV parts. It is due to the materials they are made from. They have to be made of strong materials but those materials get weakened with UV materials added. So it is kind of a Catch 22. We have the Lippert Components Screen Door Slider # LC234101 but not the stationary piece that matches it.
  view full answer...


• Wiper Seal for RV Slide Out 2010 Forest River
• Yes, we have a wide selection of wiper seals available but this is not an item that is linked to our fit guide for vehicle specific components such as receiver hitches or a wiring harnesses is. Can you provide the needed measurements for your specific RV? Please see the links for C-Channel, rubber wiper seals, and other styles of seals available.
  view full answer...


• Replacement Straight Corner Slide-Out Extrusion Cover For RV Trim
• The Straight Corner Slide-Out Extrusion Cover # 37255941 is only available in white. However, the manufacturer does state that it is paintable if that is something you have interest in doing. I have included a short video reviewing this product.
  view full answer...


• Slide Out Hydraulic Cylinder for 1993 Komfort 30FS 5th wheel
• Thank you so much for all the information, it definitely helps when doing research. The correct cylinder for the slide out for your 1993 Komfort 5th wheel is Lippert Replacement Hydraulic Cylinder for RV Slide-Out # LC342328. Based off of all the measurements you gave me, this is the exact replacement part and will work great. The cylinder is sold individually, but since your other cylinder is in good shape and serviceable you can just replace the broken one. The hydraulic cylinder does...
  view full answer...


• Available Sliding Cargo Compartment Storage Trays for RVs
• We do not offer the MorRyde brand but we do have sliding cargo storage trays for RVs, including part # LC370782 that you referenced. These are available in a range of sizes and you can see all of them by clicking on the linked page.
  view full answer...


• Trim Kits for Kwikee SuperSlide II Tray Assembly Kit for RV Cargo Compartment
• We do have the trim kits available for the Kwikee SuperSlide II Tray Assembly Kit for RV Cargo Compartment - 60 Deep # LC370787 that you referenced. You just need to choose from the following to match the width of your compartment: 24" - # LC370676 32" - # LC370682 48" - # LC370757 You'll also need to acquire some plywood at your local hardware or lumber store to complete this setup.
  view full answer...


• Finding a replacement wiper bulb seal that is 15 feet long for motorhome slideout
• The closest thing available would be the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 15' Long x 3-3/16" Wide # SR98FR. This is a 15 foot long bulb seal as you were needing and it applies to the surface by means of 3m adhesive backing. One thing to take into consideration is that the seal is 3-3/16" tall instead of the 4" that you were looking for. I would measure and make sure this will cover enough area on your slide out. If after measuring you find that this won't work for...
  view full answer...